NEDIS NWTG100YE PC/Multimedia Cable Tester Tone Generator
NEDIS NWTG100YE PC/Multimedia Cable Tester Tone Generator

NEDIS NWTG100YE PC/Multimedia Cable Tester Tone Generator

NEDIS
233-0896
65,60 €
με ΦΠΑ
 
Γεννήτρια τόνων με ανιχνευτή.

- Ο ανιχνευτής έχει σχεδιαστεί για να εντοπίζει και να αναγνωρίζει καλώδια χωρίς να καταστρέφεται η μόνωση τους
- Λειτουργεί με οποιαδήποτε γεννήτρια τόνων για τον εντοπισμό καλωδίων
- Έλεγχος έντασης και ρύθμιση ευαισθησίας ώστε να ταιριάζει και να προσαρμόζεται στις κατάλληλες συνθήκες εργασίας
- Κουμπί On/Off αποτρέπει εξάντληση της μπαταρίας
- Τροφοδοσία με μπαταρία 9V - μεγάλη διάρκεια ζωής (περίπου 100 ώρες χρήσης)
- Ειδική σύνδεση για χρήση με ακουστικά
- Περιλαμβάνονται και κόκκινή - μαύρη δοκιμαστική ακίδα
- Διακόπτης 3 θέσεων που ελέγχει τους τρόπους λειτουργίας καθώς και LED 3 χρωμάτων για τον έλεγχο πολικότητας, συνεχόμενης λειτουργίας και τάσης
- Διακόπτης επιλογής τόνων, για την επιλογή είτε στερεού τόνου ή διπλού εναλλασσόμενου τόνου (ΠΡΟΣΟΧΗ: Δεν πρέπει να συνδεθεί σε ένα ενεργό κύκλωμα εναλλασσόμενου ρεύματος άνω των 24V σε αυτή την κατάσταση)


Περιεχόμενα συσκευασίας:
- 1x Ενισχυτής ανίχνευσης
- 1x Γεννήτρια τόνων
- 2x Μπαταρία 9V
- 1x Τσάντα αποθήκευσης
- 1x Εγχειρίδιο οδηγιών|PC/Multimedia Cable Tester Tone Generator

This tone generator with amplifier probe identifies and traces wires or cables within a group without damaging the insulation. This tool applies for installing network and checking objects. The tone generator emits a single signal or multiple frequency signals and has two single test cartridges and a 4 p test joint. When wires are bounded and hidden in the wall or are imbedded by a barrier while you are using the tone generator, the tone signal which is sent by the main frame is very easy to test with the probe. The continuity of a wire, a fault of the wire, the polarity of the circuit, a network or the working voltage of the modular cable can be tested by this group tester. The pathway of the circuit and detail position can be judged by the pilot light and the tone of the speaker.
- To easily test the cable signal
- Equipped with volume control
- Including headphone connection
- The amplifier probe is designed to identify and trace wires or cables within a group without damaging the insulation
- Works with any tone generator to identify wires
- Volume control for increased sensitivity and adjustable to suit work environment
- Recessed On/Off button prevents battery drain
- It can be power with only one 9V battery and the device has a long battery life (approx. 100 hours of use)
- A plug receptacle is provided for use with a headset or headphone
- Red and black test leads are provided, and it has a standard conductor modular cord and plug
- A 3-position toggle switch controls the modes of operation plus a 3-colored LED is provided for the line polarity, continuity and voltage testing
- A tone selector switch, located inside the test set is provided for choosing either a single solid tone or dual alternating tone (CAUTION: Do'nt connect to an Active AC circuit exceeding 24V in this mode)

Package contents:
- Amplifier probe
- Tone generator
- 2x 9 V battery
- Storage bag
- Quick start guide
No reviews

2 ακόμα προϊόντα στην ίδια κατηγορία:

Product added to wishlist
Product added to compare.

Για να σας εξυπηρετήσουμε χρειάζονται κάποια cookies. Πατήστε Accept για να μας επιτρέψετε να τα χρησιμοποιήσουμε